READY DECORATIVE EXTERIOR PLASTER

Description 
Cement based, various chemicals with anti-fortified water resistant ready decorative plaster mortar 
Application Areas smooth, rough-plastered and a thin coat the entire structure of the exterior in addition decorative coating is used as the final layer of thermal insulation system materials. 
Application 
25 kg BHS Exterior decorative plaster to 4-5 liters. by adding water until a homogenous mix with a low speed hand mixer. After resting for about 5 minutes 1-2 min. become more mixed ready to use getirilir..hazırlan mortar surface steel of equal thickness with a trowel uygulanmalıdır.uygul average thickness to the largest pattern stone surface after hazırlanmalıdır.uygul be damped for 2-3 days. 
Surface Preparation and Recommendations 
will be made application surface should be smooth and firm, as well as surface will affect the adhesion of the mortar dust, mud, factors such as the oil should be removed if present. 
the surface should be moistened. 
cracks, if run-down places should be repaired by BHS repair mortar before application. 
prepared mortar should be consumed within 1.5 hours. 
the weather is so hot, frost also intense application under the wind should be avoided. 
it is cement based and blended chemicals must be protected because it is a material of hand. Gloves should be worn